Product Description
Nauticam 7'' G7 UW ULTRAHD Monitor (4K HDMI, 2K SDI input, excl. cables)
The brand new Nautiacm 7" G7 UltraHD UltraBright Monitor has been designed with professional videographers and photographers and enthusiasts in mind. The advanced monitor features an incredibly bright 3000 nit display for optimal visibility even when the lighting conditions are challenging. With a battery life of up to 6 hours you can count on it for extended shoots where it will provide consistent reliable performance throughout the duration of your dive. Advanced tools include Focus Peaking, False Colour, Histograms and many more with HDMI or DSI input options. The Nauticam 7" G7 HD UltraBright Monitor is the ultimate monitoring tool for any project.
Key Features:
-
Inputs and Outputs: The G7 supports both 4K HDMI and 2K SDI inputs as well as SDI output. Please note HDMI to SDI cross conversion is not supported.
-
Exceptional Brightness & Clarity: With an impressive 3000 nit brightness, the monitor provides clear, vibrant images even in direct sunlight, so you won’t miss a detail.
-
Advanced Image Control Tools: Easily access the following tools all at your fingertips. Anamorphic De-Squeeze, Customizable Aspect Ratios, False Color, Focus Assist, Focus Peaking, Histogram, Image Flip, Vector scope, Waveform, Zebra
Main Features:
- Rotary battery door with lock latch
- Recommended batteries have Built-in intelligent protective circuit of the positive polarity protects against overcharge, over discharge, and short-circuiting.
- 1/4-20UNC x4pcs mounting points on the bottom (for Swivel and Tilt Adjustable Monitor Mount System)
- M3 x4pcs threaded holes on bottom for Mounting Ball (PN.17958)
- Image Control tools: Anamorphic De-Squeeze, Customizable Aspect Ratios, False Color, Focus Assist, Focus Peaking, Histogram, Image Flip, Vector scope, Waveform, Zebra
Specifications
|
Dimensions: |
204mm (W) × 150mm (H) × 67mm (D) |
|
|
Brightness: |
3000nit |
|
|
Resolution: |
1920 x 1200 |
|
|
Input Signal Formats: |
4KP30 with HDMI input 2KP60 with SDI input
|
|
|
HDMI/SDI Support: |
HDMI in, SDI in & SDI out *1
|
|
|
Recommended Batteries (Not included) |
4x Nitecore NL2160/2160HP 6000mah or |
|
|
Recommended Battery Charger (Not included) |
Nitecore UMS4 Intelligent USB Four-Slot Superb Battery Charger |
|
|
Run time： |
Up to 6h at default backlight level 5 |
|
|
Included accessories |
Monitor Hood, Swivel and Tilt Adjustable Monitor Mount System |
|
|
Weight in air: |
2.5kg (incl. Swivel and Tilt Adjustable Monitor Mount System) |
|
|
Buoyance in water: |
Negative 0.83kg (incl. Swivel and Tilt Adjustable Monitor Mount System) |
|
|
Depth Rating: |
100m |
|
*1 This product doesn’t support HDMI in and converted to SDI Out for cross conversion.
*2 Please make sure the 4 protected batteries are full charged before use.
What’s in the box
- 16611 Nauticam 7'' G7 UW ULTRAHD Monitor
- Monitor Hood
- Swivel and Tilt Adjustable Monitor Mount System (attached to camera/Cine. Housing with 2x ¼’’-20 UNC screws)
- Spare O-ring for battery door, O-ring remover and lubricant
- Padded Travel Case
Required Accessories to use with HDMI 1.4 input:
- 25033 Standard HDMI bulkhead with M16 thread (25081 M24-M16 Step Down Adaptor may be required for a certain camera)
- 25100 HDMI (D-A) 1.4 Cable in 200mm length for NA-a1/FX3/GH6 (for connection from HDMI bulkhead to camera)
*25100 is compatible for NA-a1/FX3/GH6/A9III/a1II/Z9/Z8/Z6III/R1/R5II/GFX100II.
- 25047 HDMI (D-D) 1.4 cable in 800mm length (for connection between HDMI bulkheads)
Required Accessories to use with SDI input:
- 25058 M16 SDI Bulkhead
- 25060 SDI cable in 0.4m length (for connection from camera to underside of SDI Bulkhead)
- 25061 SDI cable in 0.75m length (for connection between SDI Bulkheads)
Required Accessories to use with SDI out:
- 25064 SDI surface monitor cable in 15m length (for connection from SDI Bulkhead to Surface Monitor on land)
- 25605 SDI surface monitor cable in 45m length (for connection from SDI Bulkhead to Surface Monitor on land)
